CARLO GAVAZZI VMU-C EM, Инструкция по эксплуатации

Страница: 37 / 126

VMU-C
VMU-C Instruction manual 37
3.1.10 E-MAIL (OUTGOING MAIL SERVER) CONFIGURATION
Clicking on the “E-MAIL” item will grant access to the page shown below
Outgoing mail configuration
The outgoing mail server configuration is necessary to send alarm or history data e-mails
from the plant. If configuration is incomplete or incorrect, VMU-C EM cannot send any
communications by e-mail.
Fill in the fields according to the following specifications:
 “
Sender address
”: e-mail address associated with VMU-C EM. If the address is
invalid, the e-mails sent by VMU-C EM might be considered as SPAM.
 “
Sender name
”: sender name. (From)
 “
Server SMTP" : Address of SMTP server for outgoing mail.
 “
Username Server SMTP" : username for access authentication to SMTP server.
 “
Password Server SMTP" : password for access authentication to SMTP server.
Press “Save setting” key to store settings.
Note : to ensure proper operation of email message sending,
refer to “Alarm
configuration” paragraph.
Note
: should you use a mail server not requiring the configuration of the “UserName”
and “Password” fields, when configuring VMU-C the two fields in question shall not be
filled in.