Introduction
SPX II Series
6
Operating Manual
03.17
The print module is solely intended to print suitable media which have
been approved by the manufacturer. Any other or additional use is not
intended. The manufacturer/supplier is not liable for damage resulting
from misuse. Any misuse is at your own risk.
Intended used includes heeding the operating manual, including the
maintenance recommendations/regulations specified by the
manufacturer.
NOTICE!
The complete documentation is included in the scope of
delivery on CD ROM and can also currently be found in the
internet.
1.3 Product Description
Labels, textiles and plastic material can be printed with high resolution
both in dispensing mode and in passage mode. The assembly of the
print module is possible in horizontal and vertical position and owing
to its demountable and displaceable control panel the print module
can be integrated in almost each packaging process without any
problems.
The print module can be used in thermal as well as in thermal transfer
applications.
With 8 vector fonts, 6 bitmap fonts and 6 proportional fonts the print
module has a large selection at different font types. It can be printed
inverse, in italic format or 90 degrees turned fonts.
The handling of our durable print modules is easy and comfortable.
The parameter settings are made with the keys of the foil keyboard. At
each time the graphic display shows the current status.
Time-saving firmware update is possible by interface. As default, the
print module is equipped with a parallel, serial, USB and Ethernet
interface. Additionally, the print module is equipped with an USB Host
that permits the connection of an external USB keyboard and/or an
USB memory stick. The print module automatically recognizes by
which interface it is controlled.
The print module is delivered with a printer driver and the free label
software Labelstar Office LITE. Existing labels can be saved to a CF
card or an USB stick, opened and/or modified with a PC keyboard and
finally stand-alone printed.