SPX II Series
Function Menu
03.17
Operating Manual
53
Press key
to arrive the next menu item.
This function is often used for high printing speed as the tearing of
transfer ribbon can be prevented.
The higher the '++' value is set, the slower the feeding motor is
accelerated.
The smaller the '−−' value is set, the faster the feeding motor is
decelerated.
Press key
to arrive the next menu item.
Settings
=
Printout of all print module settings such as speed,
label and transfer ribbon material.
Bar codes
=
Printout of all available bar code types.
Fonts
=
Printout of all available font types.
Press key
to arrive the next menu item.
Indication of level for IO parameters input.
0 = Low
1 = High
Port
Function
1
= Print start
2
= Cut
3
= Counter Reset
4
= External synchronisation of label position
5
= No function
6
= No function
7
= No function
8
= No function
Press key
to arrive the next menu item.
Indication of input signal level.
0 = Low
1 = High
Port
Function
9
= Error
10
= Print order active
11
= Label at dispenser photocell - at dispenser photocell
12
= Print end
13
= Ready
14
= RFID error - with option RFID only
15
= Scanner: Bar code not readable - with option scanner only
16
= Transfer ribbon prior warning
Press key
to arrive the next menu item.
Relevant results are counted and registered in RAM memory. The
protocole get lost after switching off the device.
Motor Ramp
Print examples
Input
Output
I/O Status