pCOWeb
+030220966 – rel. 1.1 – 12.12.2017
56
9.12
pCO APPLICATION UPDATE
pCOWeb
is able to update the
pCO
application of every type of
pCO
controller.
To update the
pCO
application, when one of Carel or Modbus protocol is running, the process just needs a zipped file where the needed files are present.
pCOWeb
supports:
•
BLB, BIN, BLX (strategy)
•
IUP (user interface)
•
GRP or GRT (graphic resources, not both at the same time)
•
DEV (default parameters)
•
PVT, LCT (bios logger configuration)
pCOWeb
does not support:
•
BIOS
•
BOOT
Figure 9.ee - pCO application zip file selection
The pCO must have a bios version >=4.10 installed (4.20 recommended). As starting from this specific versions of bios the
pCO
switches automatically to
Winload protocol (SERIAL1_PROTOCOL=4 or BMS_PROTOCOL = 4) as soon as the
pCOWeb
sends a specific command.
Then, a report of the application upload is shown, as below. The user can choose to proceed with the operation or to abort it.
Figure 9.ff - pCO application zip file selection