
pCOWeb
+030220966 – rel. 1.1 – 12.12.2017
48
PROCEDURE FOR INSTALLING A PLUGIN
To install a new plugin, it is only needed to upload the .zip folder containing all the files.
1.
Select the zip file containing your plugin from the Browse button
2.
Click on Upload button as below:
Figure 9.n - Plugin page: select the zip file
3.
At the end of installation procedure (which may last some tens of seconds), the page will show 3 different reports:
(1)
Upload plugin report
(2)
Unzip plugin report
(3)
Install plugin report
Figure 9.o - Plugin page: upload report
(1)
Upload plugin report: This report will provide the upload information, the file status after the upload.
It will return the status of the files, the total number of the files and the compressed size of them
(2)
Unzip plugin report: This report will provide the unzip information, the file status after the unzip.
It will return the folder name used for the unzip process (/mnt/data/tmp/) and the status of each file present in the folder.
Install plugin report: This report will provide the install information. For each file present in the unzipped folder (html pages excluded) the report will
provide the installation result. At the end of the installation procedure (which may last some tens of seconds), a report is displayed describing the
outcome of the installation of each file; if the installation was not successful, the plugin installed will need to be manually removed. In case installation
was successful, all the files composing the plugin were installed correctly. If the installation procedure attempts to overwrite a file that already exists, a
conflict will be notified.
The following messages are displayed in the installation report:
[ ok ]
file
installed
correctly
[ Conflict ]
file
already
present
[ !!! ]
file not installed correctly
Once having completed the installation, the plugin page will be as shown below:
Figure 9.p - Installed Plugins