38
Which Accessories Can I Use with Nomad 3?
The Nomad 3 is designed to be part of an ecosystem of products that make machining as simple as possible. Your
Nomad 3 works with:
Nomad Replacement MDF Wasteboards
Replacement wasteboards for your Nomad 3 are available in the Carbide
3D store. This pack of four (4) wasteboards will make sure your aluminum
table is always protected. The wasteboards are ½
″
MDF and have pre-
machined holes and countersinks for easily install. This pack comes with a
set of mounting hardware.
Flip Jig
The Nomad Flip Jig allows you to cut both sides of a part while
maintaining perfect alignment. The Flip Jig is precision-machined to
mount to the table. It uses the built-in machine calibration to make it
easy to locate it on the table (no edge finders required). The Flip Jig is
made to hold stock that's just under 3
″
× 5
″
in size, and up to 1.2
″
thick.
Two-Sided Easter Island Moai video
Installing the Nomad Flip Jig video
Stock Material
The Carbide 3D store stocks a range of plastics (acrylic, Delrin and HDPE)
metal (aluminum plate), synthetics (renshape, machining wax, and
linoleum), and PCB.
How Do I Secure Material to Nomad 3
section for a list of available workholding solutions on the Carbide 3D
store.
