10
Step 3: Connect and Home Nomad 3
Plug in the Cables
1.
Plug the power cable into the bottom
connector on the outside of the machine
enclosure. The flat side of the power
connector faces right (toward the rear of the
machine).
2.
Plug the USB cable into the middle connector.
The small end of the cable plugs into the
connector. The larger USB end will plug into a
USB port your computer.
3.
Plug the BitZero V2 into the top connector
with the small black release button facing up.
Connect to Nomad 3
Nomad 3 is controlled by Carbide Motion. To connect your machine to Carbide Motion:
1.
Power up your computer.
2.
Connect the USB cable to your computer.
3.
Start Carbide Motion on your computer.
4.
Press the Power switch on the front of Nomad 3 to power it on.
5.
In Carbide Motion, click the Connect to Cutter button.
