30
7.
In Carbide Motion, click Jog in the top menu bar to
open the
Jog screen
.
8.
Jog the machine until the tip of the probing pin is just
inside the circular pocket (or bore) on the corner of
the BitZero V2:
a.
Use the Y- / Y+ buttons to position the Y-Axis
(the table).
b.
Use the X- / X+ buttons to position the X-Axis
(the spindle, moving side-to-side).
c.
Use the Z- / Z+ buttons to position the Z-Axis
(the spindle, moving up and down).
d.
Use the Inc and Increment - buttons
to speed up or slow down the machine’s
movements.
Jog Shortcuts
Up Arrow: Move Y-Axis toward the front.
Down Arrow: Move Y-Axis toward the back.
Left Arrow: Move X-Axis to the left.
Right Arrow: Move X-Axis to the right.
, (Comma): Move Z-Axis down.
. (Period): Move Z-Axis up.
1,2,3,4: Adjust move increment
PRO TIP:
You can quickly move the spindle to the bottom-left corner of your stock by clicking the
Rapid
Position button
, then clicking
SW
on the
Rapid Position screen
.
