32
13.
In the
Probe Type dropdown list
, select BitZero V2.
14.
In the
Cycle Type dropdown list
, select Probe Corner (Z+, X+, Y+).
15.
Click the Begin Probing button to start the probing sequence.
NOTE:
Make sure your spindle/BitZero setup matches the image shown on the
Work Probing screen
for the
Cycle Type
you have selected. If your setup does not match the onscreen example, the calculated zero
location will be incorrect.
NOTE:
If you notice that your BitZero V2 moves slightly during jogging or during the probing sequence, try
removing the tension in the cable by repositioning it. For example, try draping the cable up and over the side of the
enclosure.
