6
Step 1: Unpack Nomad 3 Box
Unbox Your Nomad 3
Let’s begin by making sure that everything is accounted
for and free from any shipping damage. Open the
Nomad 3 box by cutting the tape across the top seam.
Take precautions to preserve the box while opening; if
your machine needs to be moved or shipped, the box is
the only way to ensure safe transport of the machine.
1.
Once the shipping
box is open, you’ll find a box
that contains the accessories and another that
contains the BitZero V2 (touch probe). Remove
both items from the main box.
2.
The machine weighs approximately 70 lbs. With
two people, reach into the box and from the
bottom lift the machine up and out of the box
onto a table.
3.
Remove the two foam panels from the outside of
the machine and place them back into the box
for future transport.
Remove Foam Padding
1.
Tilt the machine onto its back or side so you can
access the undercarriage.
2.
Clip the zip ties that are holding the foam
padding to the Y-Axis rail on the underside of the
machine. Be careful not to ding the Y-rail.
3.
Remove the foam padding and put it in the main
box for future transport.
4.
Return the machine to its upright position and
open the acrylic door.
5.
Remove the foam padding from the X- and
Z-Axis. Use caution not to ding the rails while
clipping the zip ties.
6.
Place all foam padding into the main box for
future transport.
NOTE:
It is important the entire machine fits on
the table and that the table is sturdy.