14
How to Install the Collet and Nut
To install the collet and nut:
1.
Snap the collet into the collet nut:
a.
Set the collet nut on the table
with the threads facing up.
b.
Use your thumb to press the
collet into the nut until you hear
a
“
click.
”
Once the collet is
clicked into the nut it is secured
in place.
2.
Insert the collet into the shaft of the
spindle and loosely thread the nut onto
the spindle shaft. Do not use the collet
wrenches to tighten the collet nut at this
time.
WARNING:
Never fully tighten the collet nut without first inserting a tool or the collet could break.
