25
Gator Tooth Clamps
Gator Tooth Clamps are ultra-low-profile. Use them as a backstop, a side
clamp, or a toe clamp. With over 30mm of lateral travel, these beasts will
hold your job down safely and securely. Clamps come in anodized
aluminum or stainless steel.
Watch the
Lock Stops
The Lock Stop is a low-profile, high-quality stainless-steel stop that can be
used on the Nomad in conjunction with the Tiger Claw (standard or
compact) or Gator Tooth Clamps. These lock stops help secure your job
with a tight grip and serrated face, no matter what you're making.
Nomad Threaded Table
This is a ½
″
thick aluminum replacement table for your Nomad 3. It's got
over fifty M6 × 1 threaded holes to give you plenty of clamping options.
The Threaded Table comes with the table, clamps, and five M6 screws to
attach it to your Nomad
’s aluminum table
.
Using Clamps with the Nomad Threaded Table video
Machinable Fixturing Wax
Machinable fixturing wax is particularly invaluable for holding and
machining thin metal such as aluminum and brass. The alternative,
double-sided tape, can gum up the cutter. With wax you can easily
remove your finished part without prying or bending it. The wax is
available in two strengths: higher strength and lower strength (water
soluble).
