CapstanAG PinPoint III ENVELOP, Руководство оператора

Страница: 89 / 128

TM
Troubleshooting
Fault Code
and Message
Fault Cause Correction
Cycle the GPS power No GPS messages are
being received
Do a check of the GPS antenna
connections and fuses
GPS messages are being
received but are empty Wait for the GPS antenna to
acquire satellites
Faulty GPS antenna Replace the GPS antenna
Faulty GPS receiver Replace the GPS receiver
Fault 32: No
RS-232 GPS
Communications No RS-232
GPS
Incorrect GPS settings Wait 10 seconds while the GPS
verifies itself. Change GPS
receiver settings to:
• Baud Rate: 19200 to
115200
• GGA: 10 Hz or more
• VTG: 10 Hz or more
• ZDA: 1 Hz or more
Fault 33: No
RS-232 GGA
Message No RS-232
GGA Message Incorrect GPS settings Change the GGA message rate
to at least 10 Hz on the GPS
receiver
Fault 34: No
RS-232 VTG
Message No RS-232
VTG Message Incorrect GPS settings Change the VTG message rate
to at least 10 Hz on the GPS
receiver
Do a check of the harnessing
between the Ethernet port on the
hub and the CapMod Ethernet
port. Fault 36:
No Ethernet
Communications No Ethernet
Communications No Ethernet communication
with the CapMod
Contact CapstanAG to repair or
replace the hub or CapMod.
Contact CapstanAG to repair or
replace the hub. Fault 38:
Internal
Communication
Fault Accelerometer
initialization
error Communication
problem with the Inertial
Measurement Unit in the
hub.
Disable the compass and gyro on
the display.
Contact CapstanAG to repair or
replace the hub. Fault 39:
Internal
Communication
Fault Accelerometer
read error Communication
problem with the Inertial
Measurement Unit in the
hub.
Disable the compass and gyro on
the display.
Contact CapstanAG to repair or
replace the hub. Fault 40:
Internal
Communication
Fault Compass
initialization
error Communication
problem with the Inertial
Measurement Unit in the
hub.
Disable the compass and gyro on
the display.
©
2021 Capstan Ag Systems, Inc.
89
PinPoint
™
III ENVELOP