CapstanAG PinPoint III ENVELOP, Руководство оператора

Страница: 48 / 128

TM
Operation
Flowmeter Setup
Line Title Line
Number
Description
The flowmeter error limit ranges from Disabled to 50%. Flow % higher than the chosen %
will cause a fault message and an alarm.
Specific Gravity 2 10
Specific gravity refers to the density or weight per gallon as compared to water (Water =
8.35 lb./gal.). For water-based products, use 1.00. For liquid fertilizer, use 1.2 for 10 lb/gal
product, etc. Specific gravity is used to calculate flow.
JD Low Flow Mode 11
Only applicable to John Deere R Series sprayers in SharpShooter
™
mode. Flow and
pressure control are modified due to the low flow control.
Preset Rate Average
Absolute The target rate will be adjusted up or down to adjust for increased or
decreased flows at individual nozzles.
12
Average The target rate will remain the same regardless of increased or decreased
flows at individual nozzles. Flow added to nozzles will be taken from the
rest of the boom.
Flowmeter Sense Resistor 13
The default value is Pull Down. The Pull Up value is only used of specific European
sprayers.
Control Tuning
Line Title Line
Number
Description
Gain K 1
The system gain or Gain K scales all of the pressure gain values together. Most of the
gain adjustments should be made to system gain. The higher the number, the more
sensitive the control system.
Gain P 2
The Gain P or proportional gain causes the control system to respond faster when the
errors are greater. The higher the number, the more sensitive the control system. To
stabilize an oscillating system, use a lower number. To speed up a sluggish, system use
a higher number.
3 Gain I
©
2021 Capstan Ag Systems, Inc.
48
PinPoint
™
III ENVELOP