manualshive.com logo in svg

Canon PIXMA Pro9000 Mark II Series, Руководство по обслуживанию

Поделиться
Скачать
Canon PIXMA Pro9000 Mark II Series Скачать руководство пользователя страница 44

4.  ADJUSTMENT / SETTINGS 

4-1.  User Mode  

User mode functions can be performed via the Resume/Cancel button or from the printer driver Maintenance 
tab. 

<Standalone printer operation> 

1)  Turn on the printer in the user mode. 

2)  Press and hold the Resume/Cancel button until the Power LED blinks in green the specified number of 

times listed in the table below, and release it. The operation starts. 

Pro9000 Mark II

TABLE OF CONTENTS

Function

Procedures

Power 

LED 

blinking

Remarks

Nozzle check 
pattern 
printing

Perform via the 
Resume/Cancel button, or 
from the printer driver 
Maintenance tab. 

1 time

Set a sheet of plain paper (A4 or Letter) in the 
rear tray. (No paper feeding from the front tray)

Print head 
manual 
cleaning

- Cleaning of all colors at the 
same time: 

Perform via the 

Resume/Cancel button. 

- Cleaning of Group-1 and 

Group-2 separately, or all 
colors at the same time:  

Perform from the printer 

driver Maintenance tab. 

2 times Unclogging of the print head nozzles, and 

maintenance to keep the print head conditions 
good. 
If there is a missing portion or white streaks in the 
nozzle check pattern printout, perform this 
cleaning.

Print head 
deep cleaning

Perform from the printer 
driver Maintenance tab. 

---

If print head manual cleaning is not effective, 
perform this cleaning. Since the deep cleaning 
consumes more ink than regular cleaning, it is 
recommended to perform deep cleaning only 
when necessary.

Automatic 
print head 
alignment

Perform via the 
Resume/Cancel button, or 
from the printer driver 
Maintenance tab. 

3 times Set 2 sheets of plain paper (A4 or Letter) in the 

rear tray. (No paper feeding from the front tray)

Manual print 
head alignment

Perform from the printer 
driver Maintenance tab. 

---

Set 2 sheets of plain paper (A4 or Letter) in the 
rear tray. (No paper feeding from the front tray)

Print head 
alignment 
value printing

Perform from the printer 
driver Maintenance tab. 

---

Confirmation of the current print head alignment 
values.

Paper feed 
roller cleaning

Perform from the printer 
driver Maintenance tab.

---

The paper feed rollers of the rear tray rotate while 
being pushed to the paper lifting plate. Since the 

41 / 56

Содержание PIXMA Pro9000 Mark II Series




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды