Canon PIXMA Pro9000 Mark II Series, Руководство по обслуживанию

Страница: 15 / 59

continuable) the front tray is in the lowered
position at the start of printing
from the front tray.)
Front tray in the
raised position
(print NOT
continuable) [1283] --- Lower the front tray, and press
the Resume/Cancel button.
(The error is indicated when
the front tray is raised position
during printing from the rear
tray.)
Front tray in the
lowered position
(print NOT
continuable) [1284] --- Raise the front tray, and press
the Resume/Cancel button.
(The error is indicated when
the front tray is lowered during
printing from the front tray.)
11 times Failed in
automatic print
head alignment
[2500] --- Press the Resume/Cancel
button to clear the error, then
perform the automatic print
head alignment again. - Print head
- Ink tank
- Carriage unit
- Logic board
Paper size
smaller than
specified [1062] --- Press the Resume/Cancel
button. (The paper will be
ejected, and the print job will
be cancelled automatically.)
The error is indicated when the
size of paper actually set is
smaller than the one selected in
the printer driver, to prevent
printing on the platen.
(e.g. When A4 paper is set in
the printer though A3 is
selected in the printer driver,
the error occurs. If A3 paper is
set in the printer and A4 is
selected in the printer driver,
then the error does not occur.) - Carriage unit
- Logic board
12 times Paper not set
properly in the
front tray, or
non-supported
size of paper set
in the front tray
[1321] --- Press the Resume/Cancel
button to clear the error, then
set a supported size of paper
properly in the front tray. - Platen unit
- Feed roller
- Paper feed motor
13 times The remaining
ink amount
unknown (raw
ink present).
[1683] U130 An ink tank which has once
been empty is installed.
Replace the applicable ink tank
with a new one. Printing with a
once-empty ink tank can
damage the printer.
To continue printing without
- Ink tank
- Logic board
- Carriage unit
12 / 56