Canon iR C3200 Series, Руководство по обслуживанию

Страница: 927 / 1216

Chapter 16
16-153
16.3.10.68 E535 Error code detail There is a fault in the swing mechanism.
0002-1706
Symptom
E535 There is a fault in the swing mechanism. (Error code detail)
Description
T-16-33
16.3.10.69
E537 Error code detail There is a fault in front alignment.
0002-1709
Symptom
E537 There is a fault in front alignment. (Error code detail)
Description
T-16-34
Detail Description Timing of detection
0001 The swing motor (M7) or the
swing guide open sensor (PI18)
is faulty.
The swing guide closed switch does not
go ON when the swing motor has been
rotated in reverse for 1 sec.
0002 The swing motor (M7) or the
swing guide closed switch
(MS6) is faulty.
The swing guide open switch does not go
ON when the swing motor has been
rotated in reverse for 1 sec.
0003 The safety area switch (MS3)
or the swing guide switch 2
(MS6) is faulty.
The swing guide closed switch is OFF
when the tray 1/2 is in the OFF position
of the safety area switch while the tray
ascent/ descent motor is in operation.
0004 The swing motor (M7) or the
swing motor clock sensor
(PI20) is faulty.
There is no clock pulse for 0.2 sec while
swinging operation is under way.
Detail Description Timing of detection
The front alignment motor
(M3) or the front aligning plate
home position sensor (S6) is
faulty. An excess load is
imposed on the front aligning
plate.
The aligning plate fails to reach the
aligning plate home position sensor when
the rear alignment motor has been driven
for a specific period of time, or fails to
leave the aligning plate home position
sensor.