Canon iR C3200 Series, Руководство по обслуживанию

Страница: 834 / 1216

Chapter 16
16-60
16.3.2.8.15 Lines on entire image when making copy using preset zoom feature
0005-6129
[ Case in the field ]
< Field Remedy >
In the field, this symptom occurred because the Main Controller PCB (Main) was faulty. Unplug and reinsert
the connectors on it. If the symptom still recurs, replace it with a new one.
Main Controller PCB (Main): FG3-2854
16.3.2.8.16 When printing via UFR, lines appear only on images that are pasted on document: no
problem with document containing texts only
0005-6180
[ Case in the field ]
Field Remedy
In the field, this symptom occurred because the UFR board was faulty. Remove and install it once again. If the
symptom still recurs, replace it with a new one.
UFR Board Ass'y: FG6-8983
16.3.2.8.17 Lines appear in main scanning direction on A4-sized copies, in sub scanning direction
on A3-sized copies
0005-9418
[ Inspected by Canon Inc. ]
Field Remedy
As a result of inspection, it was found that this symptom occurred because the Reader Controller PCB was
faulty. So, unplug and reinsert the connectors on the PCB. If the symptom still recurs, replace the PCB with a
new one.
Reader Controller PCB: FG3-2570
16.3.2.9
Ghost / Memory
16.3.2.9.1 Ghost Repeating images which seem to be caused by inferior cleaning at approximately
10cm intervals
0002-1792
Symptom
Ghost Repeating images which seem to be caused by inferior cleaning at approximately 10cm intervals
Cause
As a result of inspection, the following causes are found:
1. The degree of auxiliary charging is not appropriate because of a broken spring installed at the auxiliary brush
in the drum unit.
2. High voltage transformer PCB (FG6-9673) is faulty.
Field Remedy
1. If ghosting is accompanied by fogging as shown in Image1, replace the drum unit(s) of the color in which the
symptom appears.
2. If ghosting is NOT accompanied by fogging as shown in Image2, replace the high voltage transformer PCB
(FG6-9673) with a new one.