Canon iR C3200 Series, Руководство по обслуживанию

Страница: 1078 / 1216

Chapter 18
18-72
18.4.1.4.4 BLANK-B
0006-1629
T-18-55
18.4.1.5 PASCAL
18.4.1.5.1 OFST-P-Y/M/C/K
0000-5416
T-18-56
18.4.1.6
FEED-ADJ
18.4.1.6.1 REGIST
0000-5417
T-18-57
Used to enter adjusted value of image blank width (trailing
edge).
Adjustment
method
- If you have cleared the main controller PCB's RAM or replaced
the SRAM PCB, enter the value on the service label.
Adjustment
range
0 to 1000 (Value at time of factory shipment/value after RAM
clear: +59)
Performs offset adjustment on the test print read signal for
PASCAL control during automatic gradation compensation (full
compensation).
Adjustment
method
Increasing the value makes the image after automatic gradation
compensation (full compensation) denser.
Adjustment
range
-128 to +128
(Value at time of factory shipment/value after RAM
clear:0)
Used to adjust the registration roller clutch ON timing.
Adjustment
method
- Increasing the value by 1 moves the image by 0.1 mm in the direction
of the leading edge of the paper.
- If you have cleared the DC controller PCB's RAM or replaced the DC
controller PCB, enter the value on the service label.
Adjustment
range
- 50 to 50 (0.1 mm units)
(Value at time of factory shipment: Factory-adjusted value)
(Value after RAM clear: -20)