Canon iR C1020 Series, Руководство по обслуживанию

Страница: 361 / 408

Chapter 18
18-13
<MISC-R>
T-18-12
<MISC-P>
T-18-13
<SENS-ADJ>
Not used
<SYSTEM>
T-18-14
<HV-TR>
Not used
<CCD>
T-18-15
<PARAM>
T-18-16
ERDS-DAT Initialization of e-RDS parameters (Only displayed after the activation of e-RDS function)
- ERDS SWITCH
- RGW-ADDRESS
- RGW-PORT
- CNT-DATE
- CNT-INTV
- COM-LOG
DEPT-USR Setting the ID management by department and user management to OFF
SYS-INFO Clearing of the system administration password
ALL Clearing of the following items
- USER DATA
- SERVICE DATA
- JOB ID
- Histories
- Clearing date
MEMO:
USER DATA/SERVICE DATA are initialized for the default destination setting.
EAM-DAT Not used
ELA-DAT Not used
COPIER > FUNCTION > MISC-R
Sub item Description
SCANLAMP Turning on the scanning lamp
COPIER > FUNCTION > MISC-P
Sub item Description
MISC-SW Not used
MISC-NUM Not used
OUTPUT SRVC-DAT Output of the system data list/system dump list
SYS-DAT Output of the system data list
Mainly output the report of each service software switch and parameter used for FAX function.
SYS-DMP Output of the system dump list
Output the service data such as the number of communication, number of received sheets, number of sent sheets, number of recording
sheets, and number of errors, etc.
CNTR Output of the counter report
Display the counter indicating how often the function of reading, recording, communication, and copy operation is performed.
ERR-LOG Output of error logs
SPEC Output of the spec report
Print the current equipment condition.
ERDS-COM Output of e-RDS communication error logs
SRVC-LBL Not used
COPIER > FUNCTION > SYSTEM
Sub item Description
DOWNLOAD Switching to the download mode
COPIER > FUNCTION > CCD
Sub item Description
DF-WLVL1 Not used
DF-WLVL2 Not used
COPIER > FUNCTION > PARAM
Sub item Description
SYS-SW Registration of system parameters (See the table shown below.)
COPIER > FUNCTION > CLEAR
Sub item Description