Canon iR C1020 Series, Руководство по обслуживанию

Страница: 122 / 408

Chapter 6
6-6
6.3 Detection Jams
6.3.1 Overview
0019-8974
Jam detection
T-6-1
Jam removal
To remove a jam, open the ADF upper cover, remove a jammed sheet, and then set a document on the document tray.
However, a jam is not removed when the ADF paper trailing edge sensor detects the presence of paper (when residual paper exists).
Jam Code Jam Type Jam Condition
Single-sided
Reading
Double-sided
Reading
0001H Delay jam
The leading edge of paper does not reach the ADF paper trailing edge sensor within 1.8
sec after the trailing edge of precedent page passes through the ADF paper trailing edge
sensor in 1-sided multiple jobs.
Yes -
The leading edge of paper does not reach the ADF paper trailing edge sensor within 1.2
sec after reverse operation starts in 2-sided job.
- Yes
0002H Residual jam
The trailing edge of paper does not passes through the ADF paper trailing edge sensor
within 3.4 sec after the leading edge of paper reaches the ADF paper trailing edge
sensor in 1-sided job.
Yes -
The trailing edge of paper does not passes through the ADF paper trailing edge sensor
within 3.5 sec after the leading edge of paper reaches the ADF paper trailing edge
sensor in 2-sided job.
- Yes
0094H
In-body residual jam
(initial residual)
The ADF paper trailing edge sensor detects paper at power-ON.
Yes Yes
0095H Pickup NG
The paper is removed from the document tray during the pickup operation (within 0.1
sec after the start key is pressed).
Yes Yes