Canon imageRUNNER 1750i, Инструкция по факсимиле

Страница: 167 / 308

LDAP Server 4-62
Sp
ecifying
De
st
ina
tions Easily an
d Qu
ic
kl
y
4
3
Follow steps 2 to 4 in “Specifying Addresses via an LDAP Server,”
on p. 4-55 to search destinations.
If you press [Register e-mail address for I-Fax], the selected e-mail address can be
registered as an I-fax destination. To register e-mail addresses as I-fax addresses,
register one e-mail address at a time.
To continue searching, press [Back].
NOTE
•
To cancel a selected destination, select the destination again to clear the check mark.
•
If the optional Super G3 Fax Board-AJ1 is attached to the machine, you can sort and
limit the view of the displayed addresses by using the Type drop-down list.
•
The destinations you can specify may vary depending on the settings under <Send
Restriction Settings>. (See Chapter 4, “Customizing Settings,” in the
Remote UI
Guide .) For example, if E-mail Send is set to ‘Do not allow’ or ‘Only allow sending to
own address’, e-mail addresses are not displayed as the search results.
2
Press [Network Add. Book].
4
Select the desired destination
from the search results.
You can select up to 32 destinations.
If you want to select the first 32
destinations, press [Select All (Max 32)]. (If
a destination is selected, the key changes
to [Clear Selection].)