manualshive.com logo in svg

Canon imagePROGRAF W6200, Руководство по обслуживанию, Страница: 96 / 311

Поделиться
Скачать
Canon imagePROGRAF W6200 Скачать руководство пользователя страница 96

43) E02D03

End of Roll

This is displayed when the feed motor could not reach the prescribed speed within
the prescribed time or the feed roller sensor could not detect the prescribed number
of steps from the encoder slit.

44) E02D05

Turn Power Off!!

This message is displayed when a fan lock is detected when the air flow fan is
running.

45) E02D06

Turn Power Off!!

This is displayed when the valve cam sensor could not detect valve cam rotation
during switching of the ink supply valve.

46) E02E01

Turn Power Off!!

This is displayed when a jam or other physical problem puts an excessive load on
the carriage motor so that the carriage cannot operate.

47) E02E05

Turn Power Off!!

This is displayed when the carriage motor could not reach the prescribed speed
within the prescribed time.

48) E02E06

Turn Power Off!!

This is displayed when there is an error in the carriage motor.

49) E02E10

Turn Power Off!!

This is displayed when an error has occurred in the IEEE1394 interface.

50) E02F00

Turn Power Off!!

This is displayed when an error has occurred in the firmware of the system
controller.

c) Service call error description

When a service call error occurs, the error is not cleared and the error display
remains on the operation panel even if printer power goes off and on.
This is to avoid thet the user can cleare service call errors preventing the printer
from damage.
Service call errors can be cleared, however, by starting up the printer with the
service mode.

1) Printhead Error!

This is displayed when a voltage error occurs in the printhead.

2) Scale Read Error

This is displayed when the carriage sensor could not read the linear scale.

3) ERROR   S04010  *E04010 Service Call Message

This is displayed when RTC is not set.

4) ERROR   S04011  *E04011 Service Call Message

This is displayed when the system controller lithium battery voltage is low.

5) ERROR   S04012  *E04012 Service Call Message

This is displayed when the RTC clock is stopped.

6) Turn Power Off!!  *E02777 Service Call Message

This is displayed when there is a communication error between controllers.

3-49

W6200

Part 3: Operations

Содержание imagePROGRAF W6200
























































































































































































































































































































Отзывы:

Нет отзывов