Canon imagePROGRAF W6200, Руководство по обслуживанию, Страница: 92 / 311

b) Error description
1) E02000
End of Roll
This is displayed when a feed sensor has detected the roll media trailing edge during
printing or loading of the roll media.
2) E0200A
Size undetected
This is displayed when the light intensity of the media sensor could not be adjusted
during media loading.
3) E0200B
Size undetected
This is displayed when the media sensor has detected a media loading position error
during detection of the media right edge.
4) E0200C
Size undetected
This is displayed when the media sensor could not detect the media leading edge
during detection.
5) E0200D
Size undetected
This is displayed when the feed sensor could not detect the cut sheet trailing edge
even after feeding the prescribed length during cut sheet loading.
6) E0200E
Media Too Small
This is displayed when the media sensor has detected a media smaller than the
prescribed size during media loading.
Media width: Less than 244 mm
Media length: Less than 200 mm
7) E0200F
Media Too Large
This is displayed when the media sensor has detected a media larger than the
prescribed size during media loading.
Media width: More than 1400 mm
Media length (roll media): More than 15 m
Media length (cut sheets): More than 2.7 m
8) E02010
Media Skewed
This is displayed when the media sensor detects slanting that exceeds the prescribed
amount during media loading.
9) E02015
Cut Failed
This is displayed when the media sensor could not detect the media leading edge
during detection after cutting of the roll media.
10) E02016
Load Cut Sheet
This is displayed during printing when the feed sensor has detected the cut sheet
trailing edge at a different position from the media loading position.
3-45
W6200
Part 3: Operations