manualshive.com logo in svg

Canon imagePROGRAF W6200, Руководство по обслуживанию, Страница: 30 / 311

Поделиться
Скачать
Canon imagePROGRAF W6200 Скачать руководство пользователя страница 30

3.2 Firmware Confirmation

Firmware has been downloaded to each of a System Controller and Engine Controller.
When replacing each board with the one with Service Parts, confirm that each firmware
is the latest version.  If it is not the latest version, please update it to the latest version.

For how to upgrade each board, please refer to 

Part 3: 

6. PRINTER SERVICE

SOFTWARE.

3.3 Precautions Against Static Electricity

Certain clothing may generate static electricity, causing an electrical charge to build up 
on your body. Such a charge can damage electrical devices. 
To prevent this, discharge any static buildup by touching a grounded metal fitting
before you start disassembling the printer.

3.4 Precautions for Disassembly/Assembly

The Parts Catalog describes the disassembly/assembly procedures. See the Parts
Catalog when assembling/disassembling the printer. The precautions for
disassembly/assembly are described in 

Part 5: 

5. DISASSEMBLY/REASSEMBLY.

3.5 Self-Diagnostic Feature

The printer has a diagnostic feature which analyzes printer problems (which may
occur).
The diagnostic results will be displayed on the display and indicated by a light.
For detailed information, see 

Part 3: 

4.2 Error Indicators.

3.6 Disposing of Waste Ink

Dispose of the waste ink according to local regulations.

3.7 Disposing of Lithium Battery

Dispose of the lithium battery according to local regulations.

The engine controller and the system controller of this printer each uses a
lithium battery. The lithium battery for the engine controller is a non-
replaceable part and the lithium battery for the system controller is a
replaceable part.

1-13

W6200

Part 1: Safety and Precautions

REF.

NOTE

Содержание imagePROGRAF W6200
























































































































































































































































































































Отзывы:

Нет отзывов