manualshive.com logo in svg

Canon imagePROGRAF W6200, Руководство по обслуживанию, Страница: 206 / 311

Поделиться
Скачать
Canon imagePROGRAF W6200 Скачать руководство пользователя страница 206

5.3.3 Moving the wiper unit

1) Remove the right side cover.
2) Insert a long Phillips-head screwdriver into the hole in the purge gear from the

printer right side.

3) Rotate the purge gear in the counter-clockwise direction, and then move the wiper

unit.

5.4 Opening and Closing the Ink Supply Valve

1) Remove the right side cover.
2) Press the valve lever with your finger to open the ink supply valve. (Normally, the

ink supply valve is closed.)

• If the tube is filled with ink and the printhead lock lever is unlocked

while the ink supply valve is opened, the ink in the tube may reverse-
flow due to the difference in the water head, and ink may leak from the
ink supply needle.

• If the ink supply valve remains open, such as when an ink supply valve

switching error (E02D06) occurs, remove the valve motor unit (see 

5.2.10,

Ink tank unit

), and then close the ink supply valve.

Part 5: Maintenance

W6200

5-38

CAUTION

Ink supply valve

Open

Close

Ink tank unit

Figure 5-42 Opening and Closing the Ink Supply Valve

Содержание imagePROGRAF W6200
























































































































































































































































































































Отзывы:

Нет отзывов