manualshive.com logo in svg

Canon imagePROGRAF W6200, Руководство по обслуживанию, Страница: 33 / 311

Поделиться
Скачать
Canon imagePROGRAF W6200 Скачать руководство пользователя страница 33

1.2 Features

• Light and compact body made possible by rear feeding of roll media. 
• Four-sides borderless printing support (roll media) eliminates tedious cutting and

simplifies poster creation.

• High quality photo finish with 1200 x 1200 dpi maximum resolution using highly

lightfast, water-proof, and ozone-proof six color (C, M, Y, Bk, PC, PM) pigment ink.

• High-speed printing with bidirectional print control using 1 inch (1280-nozzles) head

for each color.

• Tubing type ink supply completely separating print head and large capacity ink tank.
• Support for roll media and cut sheets.
• Roll media with width from 297.0 to 609.6 mm and length up to 18 m can be used.
• Carriage mounted cutter mechanism enables automatic sheet cutting.
• Cut sheet feeding, media discharge, and ink tank replacement can be performed

easily from the front.

• Standard support for 10Base-T/100Base-TX TCP/IP network. Optional support for

high-speed IEEE1394 or USB2.0 interface.

Part 2: Product Specifications

W6200

2-2

Содержание imagePROGRAF W6200
























































































































































































































































































































Отзывы:

Нет отзывов