Canon imagePROGRAF W6200, Руководство по обслуживанию, Страница: 263 / 311

5-95
W6200 Part 5: Maintenance
J1108
Pin number Signal name IN/OUT Function
1 GND –– GND
2 H5V IN Power supply for driving head logic (+5.1V)
3 +5V IN Power supply (+5.1V)
4 VHFBG –– NC
5 VHFBH –– NC
6 HEADEEPCSX IN Head EEPROM chip select signal
7 HEADEEPWDX IN Head EEPROM write signal
8 HEADEEPRDX OUT Head EEPROM read signal
9 HEADEEPCLKX IN Head EEPROM data transfer clock
10 GND –– GND
11 DASHX IN ASIC output sample hold
12 DADTX IN ASIC input data
13 DLDX IN ASIC input data latch signal
14 DSOUT1 OUT ASIC analog output
15 DSOUT2 OUT ASIC analog output
16 GND –– GND
17 DACLKX IN ASIC input data clock
18 GND –– GND
19 C5_HENB_B IN Heat pulse input (BK)
20 C4_HENB_B IN Heat pulse input (PC)
21 C3_HENB_B IN Heat pulse input (C)
22 C5SUBH IN Subheat pulse input (BK)
23 C4SUBH IN Subheat pulse input (PC)
24 C3SUBH IN Subheat pulse input (C)
25 C2SUBH IN Subheat pulse input (PM)
26 C1SUBH IN Subheat pulse input (M)
27 C0SUBH IN Subheat pulse input (Y)
28 C2_HENB_B IN Heat pulse input (PM)
29 C1_HENB_B IN Heat pulse input (M)
30 C0_HENB_B IN Heat pulse input (Y)