manualshive.com logo in svg

Canon imagePROGRAF W6200, Руководство по обслуживанию, Страница: 161 / 311

Поделиться
Скачать
Canon imagePROGRAF W6200 Скачать руководство пользователя страница 161

Upper cover safety switch

The microswitch-based upper cover sensors detect opening and closing of the upper
cover.
When the upper cover is closed, a switch is depressed to notify the sensor that the
cover is closed.
To prevent the uneven fitting of the upper cover, sensors are located on both the
right and left sides.

Right cover sensor

The photo interrupter-based right cover sensor detects the opening and closing of
the right cover.
When the right cover is closed, the sensor light is cut off by the sensor arm, and this
notifies the sensor that the right cover is closed.

When the upper cover is closed, the +26.5 V power is supplied by the
power supply to drive the carriage motor and feed motor.

Part 4: Technical Reference

W6200

4-52

NOTE

Содержание imagePROGRAF W6200
























































































































































































































































































































Отзывы:

Нет отзывов