Canon imagePROGRAF W6200, Руководство по обслуживанию, Страница: 258 / 311

Part 5: Maintenance W6200
5-90
J212
Pin number Signal name IN/OUT Function
1 C0_HENB_B OUT Y color heat pulse output
2 C1_HENB_B OUT M color heat pulse output
3 C2_HENB_B OUT PM color heat pulse output
4 C0SUBH OUT Y color subheat pulse drive
5 C1SUBH OUT M color subheat pulse drive
6 C2SUBH OUT PM color subheat pulse drive
7 C3SUBH OUT C color subheat pulse drive
8 C4SUBH OUT PC color subheat pulse drive
9 C5SUBH OUT K color subheat pulse drive
10 C3_HENB_B OUT C color heat pulse output
11 C4_HENB_B OUT PC color heat pulse output
12 C5_HENB_B OUT K color heat pulse output
13 GND - GND
14 LICC2_CLK OUT LICC2 input data clock
15 GND - GND
16 DSOUT2 IN LICC2 analog output
17 DSOUT1 IN LICC2 analog output
18 LICC2_LD OUT LICC2 input data latch signal
19 LICC2_DT OUT LICC2 input data, L: positive logic output if 2.0V or less
20 ADTGR OUT LICC2 output sample hold
21 GND - GND
22 HEADEEPCLK OUT Head EEPROM data transfer clock
23 HEADEEPRD IN Head EEPROM read signal
24 HEADEEPWD OUT Head EEPROM write signal
25 HEADEEPCS OUT Head EEPROM chips select signal
26 VHFBH - NC
27 VHFBG - NC
28 +5V OUT Power supply (+5.1V)
29 H5V OUT Head logic drive voltage
30 GND - GND