Canon imagePRESS Server B5000 Скачать руководство пользователя страница 57

Страница: 57 / 128

FTP

Note:

FTP printing is supported for Windows, Mac OS, UNIX, Linux and other operating systems supporting the

FTP protocol.

Note:

The Scan to FTP function is no longer supported. This setting still displays but is not valid.

The imagePRESS Server supports an FTP server that is compliant with the following RFC959 features:

•

[STOR (put)] and [STORU (put unique)]: Transfer the print job to the FTP server.

•

[IMAGE (BINARY)]: Transfer data in binary mode.

•

[SYST] and [STAT]: Retrieve basic FTP server status.

•

[STREAM] mode: Transmit data as a stream of bytes.

•

[LIST] and [NLIST]: List the files and directories.

•

[PASV (passive mode)]: Specify passive mode FTP.

•

[NOOP]: No action.

•

[HELP]P: Provide help for FTP server.

•

[QUIT]: Terminate connection.

•

[USER (username)], [PASS (password)]: Provide user name and password for FTP server.

•

[ABOR (abort)]: Abort the connection.

•

[CWD (change working directory)]: Change working directory.

•

[REIN (reinitialize)]: Reinitialize connection.

•

[REST (restart)]: Restart the file transfer.

Use FTP Passive Mode

When this option is selected, the FTP server opens a dynamic port, sends the FTP client the server's IP address

to connect to and the port on which it is listening over the control stream and waits for a connection from the

FTP client.

Settings:

Off (default)

Enable FTP Printing

Select this option to allow FTP printing on the imagePRESS Server.

Settings:

On (default)

Off

Configuration and Setup

Setting up from the printer control panel

Содержание imagePRESS Server B5000

































































































































Результаты поиска

Содержание imagePRESS Server B5000

Отзывы:

Похожие инструкции для imagePRESS Server B5000

Бренды по названию

Популярные бренды

Canon imagePRESS Server B5000, Конфигурация и настройка

Результаты поиска

Содержание imagePRESS Server B5000

Отзывы:

Похожие инструкции для imagePRESS Server B5000

Бренды по названию

Популярные бренды