Canon imagePRESS Server B5000 Скачать руководство пользователя страница 45

Страница: 45 / 128

Protocol

The following setup options are available in the

Protocol

group.

IPv4

Get IP Address Automatically

Automatically assigns an IP address to the imagePRESS Server.

Settings:

On (default)

Off

IP Address

Enter the imagePRESS Server IP address for Ethernet.
This IP address, unlike an IP address set automatically, remains the same if you restart the imagePRESS Server.

You must change the default to a valid address for your network.

Note:

The IP address range 10.255.255.0/24 (the IP addresses from 10.255.255.0 to 10.255.255.255) cannot be

used for the imagePRESS Server because this range is used for the local network connected to the printer. If you

would like to use this IP address range for the imagePRESS Server, please contact your authorized service/

support center.

Note:

This option is available when

Get IP Address Automatically

is not selected.

Settings:

127.0.0.1 (default)

Subnet Mask

Set the subnet mask for printing with TCP/IP on your network.

Note:

This option is available when

Get IP Address Automatically

is not selected.

Note:

Before proceeding, confirm the subnet mask setting with your network administrator.

Settings:

255.255.255.0 (default)

Gateway Address

Set the gateway address for printing with TCP/IP on your network.

Configuration and Setup

Setting up from the printer control panel

Содержание imagePRESS Server B5000

































































































































Результаты поиска

Содержание imagePRESS Server B5000

Отзывы:

Похожие инструкции для imagePRESS Server B5000

Бренды по названию

Популярные бренды

Canon imagePRESS Server B5000, Конфигурация и настройка

Результаты поиска

Содержание imagePRESS Server B5000

Отзывы:

Похожие инструкции для imagePRESS Server B5000

Бренды по названию

Популярные бренды