Canon imagePRESS Server B5000, Конфигурация и настройка

Страница: 51 / 128

Note: We do not recommend specifying a large range for Redirect Port Range. If a large number of ports must
be redirected, the imagePRESS Server might be slow when restarting.
•
Original Port: From
: Enter the starting port of the original range.
•
Original Port: To
: Enter the ending port of the original range. The value must be greater than the value
entered for the starting port in the previous field,
Original Port: From
.
•
Target Port: From
: Enter the starting port of the target range.
Settings:
1-65535 (default is 1)
Delete Port
Press to specify ports or a range of ports to delete. If no ports have been added, a message displays to indicate
that no ports exist.
Information about basic ports
The following table lists all the basic ports available on the imagePRESS Server.
Basic ports are used for printing or other job management functions.
Note: Basic ports are not subject to the filtering settings specified in Setup Other Ports on page 50.
Port number Protocol
20-21 FTP
25 SMTP server
80 HTTP
135 MS RPC
137-139 NetBIOS
161-162 SNMP
427 SLP
443 HTTPS (HTTP over SSL)
445 SMB/IP
500 ISAKMP
515 LPD
631 IPP
2869 Windows Internet Connection Service (ICS)
Note:
This port is not listed in the interface.
Configuration and Setup
Setting up from the printer control panel
51