manualshive.com logo in svg

Canon imagePRESS C1, Руководство по обслуживанию

Поделиться
Скачать
Canon imagePRESS C1 Скачать руководство пользователя страница 879

Chapter 15  

15-16

E731

There is a rendering PCB error

3001 At start-up, initialization of rendering PCB fails.

Turn off the main power, and check the connection of the UFR 
board; then, turn on the main power.
If the machine fails to reset, replace the UFR board or the main 
controller PCB.

3015 While a job is being processed, there is no video data in the chip 

of the main controller PCB (main) although the software is 
operating without a problem.

Turn off the main power, check the connector of the rendering 
PCB or main controller PCB and the power supply of the printer, 
and then, turn on the main power.

E732

There is an error in reader communication.

0001 There is an error in reader communication.

Turn off the main power, and check the connectors to the reader, 
and check the power supply of the reader; then, turn on the main 
power.

9999 Although a printer model, the machine is identified as a reader unit 

at start-up (A copier model is started up as a printer model when 
the RAM is initialized).

Turn off and then on the main power.

E733

There is a printer communication error.

0000 There is a printer communication error.

At start-up, the printer is not detected.

Turn off the main power, and check the connectors to the DC 
controller PCB and the main controller PCB, and check the power 
supply of the printer; then, turn on the main power.

0001 There is a printer communication cable error

Turn off the main power, and check the connectors to the DC 
controller PCB and the main controller PCB, and check the power 
supply of the printer; then, turn on the main power.

E740

There is an Ethernet board error

0002 At time of start-up, the MAC address is found to be illegal.

A non-Canon Mac address is detected.

Turn off the main power, and replace the Main Controller 
PCB(SUB LANBAR-A); then turn on the main power.

0003 At time of start-up, PHY ID is found to be illegal.

Turn off the main power, and replace the Main Controller 
PCB(SUB LANBAR-A); then turn on the main power.

E744

There is a language file/Boot ROM error.

0001 The version of the language file on the HDD is different from the 

version of bootable.

Download the appropriate language files of the correct version 
using the Service Support Tool.

0002 The size of the language file on the HDD is too large.

Download the appropriate language files of the correct version 
using the Service Support Tool.

0003 There is no language to use in Config.txt on the HDD. 

None of the languages on the HDD is appropriate for use.

Download the appropriate language files of the correct version 
using the Service Support Tool.

A switchover cannot be made to a language file on the HDD.

Download the appropriate language files of the correct version 
using the Service Support Tool.

0004 A switchover cannot be made to a language file on the HDD.

Download the appropriate language files of the correct version 
using the Service Support Tool.

1000 There is a Boot ROM project error.

The installed Boot ROM is of the wrong type.

Turn off the main power, and replace the Boot ROM with one of 
the correct type; then turn on the main power.

2000 There is an engine ID error in Soft ID.

The engine ID, described in Soft ID, is found to be illegal.

Turn off the main power, and replace the Soft ID PCB with one of 
the correct type; then, turn on the main power.

E747

There is an error in the ASIC for image processing or in the ASIC for memory control/communication control.
---

There is an error in IC1015 (ASIC for image processing) or in 
IC1012 (for memory control/communication control) on the main 
controller PCB (e.g., image data transfer error).

After replacing the main controller PCB and each sub board, check 
the PCB and then, turn on the main power.

Code

Cause (Detection Description)

Remedy

Содержание imagePRESS C1


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды