Canon imagePRESS C1, Руководство по обслуживанию

Страница: 71 / 1265

Chapter 1
1-29
*: Indicates the default setting.
*1: This item is displayed by executing service mode (COPIER > OPTION > BODY > IMAG-ADJ)
*2: Correction with the print server is valid only when the Image PRESS Server Q1 is mounted.
*3:
A mode: restriction on the amount of toner deposit is 'Yes'. (Although adjusting the color balance or performing fine adjustment for the density, the amount of toner
deposit is restricted.)
B mode: restriction on the amount of toner deposit is 'No'. (When adjusting the color balance or performing fine adjustment for the density, the amount of toner
deposit may exceeds its limit.)
F-1-16
F-1-17
Displayed by
Service
Switch (*1)
Tail End White
Patch Correction
ON*/OFF When paper with curls or paper that tends to curl is used
for 2-Sided copying, toner may not be applied on the tail
end of the paper and the area where toner is not applied
may remain white. Although this can be reduced by using
the Tail End White Patch Correction mode, the colors at
the tail end of the paper may appear light when printing
images of intense colors.
The setting is possibly
set to OFF if Sample H
of the faulty images
appears. This should be
set to ON.
COPIER >
OPTION >
2TR-RVON
(Level2)
Default
Display
Clear Toner
Density
Adjustment
Light/Normal*/Heavy This mode is to specify the clear toner application amount
in 5 color full print.
Default
Display
Clear Coat Form
Composition
Coating Mode
ON*/OFF This mode is whether to set the clear toner coating process
on full page with the paper that is already printed (pre-
printed media).
Set this function to ON to execute the coating process.
This is only effective
for post-clear process.
Panel
Display Item Setting Objective Use/Suppl. Service Mode