Canon CXDI-55C, Руководство по обслуживанию

Страница: 179 / 186

6. Troubleshooting
15
6.2.3 When the hard drive crashes
Recover the system using the following method when the hard drive crashes.
1) Replace the crashed hard drive with the hard drive provided in item B above, “Backup
method using a hard drive”.
* Copy \Ccr from the original hard drive to the new hard drive when the D drive in the
crashed hard drive is in a normal state (a problem case caused by the OS).
Note: Perform Step 2 after upgrading if the CXDI software version you are using is newer
than that in the hard drive provided by copying from hard drive to hard drive during system
installation.
(Files such as StrTable.ini are not compatible when the CXDI software version is different.)
* When the hard drive has crashed mechanically, proceed to Step 2 and subsequent steps.
2) After replacement, copy to overwrite all the ini files stored on the floppy disk to d:¥ccr in
order to recover the user’s environment.
Note that images captured by users cannot be inherited in this case.
Note: Calibration is required when the system has been used for over one year.
Note: Perform Step 2 after upgrade if the CXDI software version you are using is newer than
that in the hard drive provided by copying from hard drive to hard drive during system
installation.
(Files such as StrTable.ini are not compatible when the CXDI software version is different.)
6.2.4 When problems occur in driver software
When drivers such as the touch panel driver are damaged, reinstall the appropriate drivers by
referring to “C3S Service Manual”.