Canon Color imageRUNNER C5180 Series, Руководство по обслуживанию

Страница: 99 / 851

Chapter 2
2-33
2.6.3 Installation Procedure in the
imageWARE Accounting Manager
(henceforth: iWAM) environment
1) Check to see that 'ID00000001 to ID00001000'
have been created in '[Initial Settings /
Registration] > [System Administration Settings]
> [Department ID management] > [Count
Management]' (In the case of entering '1' as the
first number in 'Service mode > COPIER >
FUNCTION > INSTALL > CARD')
2) Press [Reset] to exit from [Initial Settings/
Registration].
3) Select: [Initial Settings / Registration] > [System
Administration Settings] > [Network Settings] >
[TCP/IP Settings] > [IP Address], and make
settings of [IP Address], [Gateway Address], and
[Subnet Mask] suitable for the user's
environment.
4) Press [Reset] to exit from [Initial Settings /
Registration].
5)
Be sure that without selecting: [Initial Settings /
Registration] > [System Administration Settings] >
[System Administrator Information Settings] and
then registering [System Administration Department
ID] and [System Administration Password], 'Card
Registration to the Device' cannot be executed in the
iWAM settings.
Select: [Initial Settings / Registration] > [System
Administration Settings] > [System Administrator
Information Settings], and then enter given numbers
for [System Administration Department ID] and
[System Administration Password].
6) Press [Reset] to exit from [Initial Settings /
Registration].
7) Turn OFF the power supply following the shut-
down sequence.
2.7 Installing the Original Tray
2.7.1 Checking Contents (Document
Tray-J1)
F-2-91
[1] Document Tray-J1 1 pc.
[2] Washer 2 pc.
[3] Stepped screw (M4) 2 pc.
[4]* Stepped screw 2 pc.
* Not use for the machine.
[1]
[3] [2] [4]