Rate: 138 g/h (1,9 kW) - injector n° 015208
Category: butane direct pressure
Thank you for choosing the Campingaz®
PARTY
GRILL® MAX or PARTY WOK or PARTY GRILL® Combo.
A - IMPORTANT: ALWAYS BE CAREFUL WHEN
USING GAS !
The purpose of these instructions is to enable you to
use your Campingaz®
ARTY GRILL® MAX or PARTY
WOK or PARTY GRILL® Combo
correctly and in com-
plete safety.
Please read them carefully to familiarise yourself with
the equipment prior to assembling the gas cylinders.
Keep these instructions in a safe place so that you
can refer to them if needed.
Please observe these instructions and the safety
measures printed on the Campingaz® 907 cylin-
ders. Failure to observe these instructions may
result in the user and people in the immediate
vicinity being put at risk.
This equipment must be used exclusively with
Campingaz® 907 cylinders. Using other gas
containers may be dangerous.
The Société Application Des Gaz accepts no
responsibility where cartridges of any other make
are used.
This equipment should only be used outside premises
and kept away from all inflammable materials.
Do not use equipment which leaks, functions incor-
rectly or is damaged. Return it to your retailer who will
inform you of your nearest after-sales service.
Never modify this equipment or use it for purposes for
which it is not intended.
B - ASSEMBLING THE HANDLES
- Remove the stove from its packaging (Fig.1), remove
pan support (2)(Fig.2).
- Assemble handles on each side of the stove by inser-
ting the screws through the holes provided for this
purpose (Fig.3). Screw in tightly until the handles no
longer move. Make sure that the handles stand proud
either side of the grill.
C - MOUNTING ON CAMPINGAZ® 907 CYLIN-
DER
(If the current cylinder is empty, read paragraph F -
Removing or changing the cylinder).
When installing or changing a gas cylinder, always
operate in a well-ventilated location, preferably outsi-
de, never near a flame, heat source or spark (cigaret-
te, electric apparatus, etc.) and far away from other
people and inflammable materials.
- Check that leaktight seal (8) is installed and in
good condition, as is thread (9) on the tap (Fig.4).
Do not use the stove if the seal is missing or
damaged; return it to your retailer.
- Check that the tap (10) is firmly closed by turning the
wheel clockwise: arrow direction "-" (Fig.10).
- Place the cylinder on a firm, horizontal surface and
remove the cap.
- Screw tube (5)(Fig.5) onto the cylinder (18) holding it
by tube grip (11). Make sure you hold the tube verti-
cal when screwing it in to avoid damaging the gas
cylinder. Screw the tube right into valve (12) on the
cylinder. Hand tighten
without forcing
, assembly
should be easy.
- Screw bowl (1)(Fig.5) onto tube (5). Hand tighten
without forcing.
In case of leakage (gas smell before opening the
valve), put immediately the equipment outside, in a
well-ventilated area, without inflammation source,
where it will be possible to locate and stop the lead. If
you wish to check the tightness of the equipment, do it
outside. Do not try to locate a leak with a flame, use
gas leak detection liquid.
D - ASSEMBLING THE EQUIPMENT
1) Grill function (
Party Grill® Max
or
Party Grill®
Combo
)
- Position pan support (2) in the slots in bowl (13) as
shown in figure 6.
- Mount grease trap (4) on bowl (1) as shown in figure 7.
- Position grill (6)(Fig.7)
on the pan support
and
check that pouring spout (14) is positioned correctly
over the grease trap (4).
- The equipment is ready for use
The grill plate may be oiled lightly to prevent food stic-
king during cooking.
2) Wok function (
Party Wok
or
Party Grill® Combo
)
- Position wok (7)(Fig.8) on the bowl, matching the
arrows on the wok with those on bowl (A). Check that
the wok is good and stable on the equipment.
- The equipment is ready for use
3) Stove function (
Party Grill® Max, Party Wok
or
Party
Grill® Combo
)
- Position pan support (2) in the slots in bowl (13) as
shown in figure 6.
- The equipment is ready for use
E - USE
Additional instructions:
Do not use your stove less than 25 cm from a wall
or combustible object.
Place the stove on a horizontal surface.
Do not move it when in use to prevent large fla-
mes caused by liquid butane combusting instead
of vaporised butane. If this occurs, switch the
stove off by closing the tap.
Should it leak (smell of gas), close the tap.
Reduce the power of the stove if using flat metal-
lic accessories like a toaster.
Never heat the cooking plate for more than one
minute without food.
Do not use a pan of less than 18 cm in diameter.
Let the equipment cool down completely before
handling it to put it away.
Use suitable gloves to handle the grease collector
when the equipment is in use (to empty it, for
example).
4
GB
PARTY GRILL mode d’emploi.qxp 03/03/2006 16:08 Page 4
