Campbell NL240, Инструкция по эксплуатации

Страница: 36 / 74

NL240 Wireless Network Link Interface
•
Enter the TLS Private Key Password if the TLS Private Key is
encrypted. Otherwise, leave the setting blank.
• After loading the key and certificate, click the Apply button. The
NL240 will reboot. Connect with DevConfig again and navigate to
the Settings Editor tab and then to the TLS tab. The TLS Status
should say
Initialized
.
The TLS Settings described above cannot be edited over a
standard TCP DevConfig link. The TLS Private Key, TLS Private
Key Password and TLS Certificate can only be edited/transmitted
over a secure
DevConfig
link (USB or TLS).
If the status of the TLS stack is
Initialized , the NL240 will
automatically negotiate a secure TLS connection with DevConfig
as long as the
Use IP Connection
option is selected.
8.2.6.1 TLS Proxy Server
A TLS proxy server is a device that acts as a secure intermediary for requests
from clients seeking resources from other servers. A client connects to the
proxy server, requesting some service, such as a file, connection, web page, or
other resource, available from a different server. The proxy server evaluates
the request according to its filtering rules. For example, it may filter traffic by
IP address or protocol. If the request is validated by the filter, the proxy
provides the resource by connecting to the relevant server and requesting the
service on behalf of the client.
When the TLS Proxy Server function is enabled, the NL240’s TLS Proxy
Server maintains a secure TLS connection with a remote TLS client and
forwards data onto a datalogger using a standard TCP connection thus enabling
communication with TLS clients. The TLS client can be a web browser using
HTTPS or other user-supplied TLS client. Any other client program that
encrypts a standard TCP connection using TLS may be used to establish a
connection with the NL240 TLS Proxy Server and the NL240 will forward
unencrypted TCP data to a datalogger. In this way, a remote TLS client can
establish a TLS connection with a datalogger.
The settings found in the TLS Proxy Server and TLS tab in DevConfig are used
to configure the NL240 TLS Proxy Server.
Two physical configurations are possible and the required settings differ
depending on the configuration chosen. The possible configurations are shown
in the following figure.
NOTE
NOTE
26