26
30. Now place on the second fire clay ring evenly...
32. Place on the third fire clay ring and adjust the rotary
chimney direction by turning. The edge lines of the
transitions must lie over each other.
34. To simplify installation, please lay on the packaging
strips at all four corners again and position the
hood section
without gluing
(then remove the
installation aids again).
31. ... and adjust the rotary chimney by turning. The
edge line of the transitions must lie over each other
(see arrow).
33. Place on the fourth fire clay ring and adjust the
rotary chimney direction by turning. The edge lines
of the transitions (inside) must lie over each other.
(see arrow).
