Cambium Networks cnWave, Руководство пользователя

Страница: 124 / 248

Installation 124
Figure 109: Fixing the assembled bracket body
5. Fit the mounting plate to the bracket body by positioning the open- ended slots over the short
bolts. Insert the remaining short bolts through the longer curved slots into the threaded holes in
the bracket body. Adjust the elevation angle and tighten the bolts to a torque setting of 5.0 Nm
(3.7 lb-ft) using a 13 mm spanner or socket.
Figure 110: Fixing the mounting plate and adjusting the elevation
V3000 Tilt bracket assembly with band clamps
Follow the below instructions to assemble the tilt bracket with band clamps:
1. Follow step 1 of the V3000 tilt bracket assembly procedure.
2. Feed the band clamps through the slots in the bracket body. Secure the bracket body to the pole
using band clamps (not supplied by Cambium), ensuring that the arrow in the body is pointing
upwards. Adjust the azimuth angle, and tighten the band clamps to a torque setting of 6.0 Nm (4.5
lb-ft).
3. Fix the mounting plate to the bracket body with four of the short bolts, using a 13 mm spanner or
socket. Adjust the elevation angle, and tighten the bolts to a torque setting of 5.0 Nm (3.7 lb-ft).