Cambium Networks cnWave, Руководство пользователя

Страница: 226 / 248

Operation 226
Single PoP network
When the feature is disabled, you must add the IPv6 route by performing the following steps:
1. From the landing page of the device UI, navigate to Tools > Settings > IPv6 Routes > Add new.
The Add Route page appears, as shown in the Figure 249 .
Figure 249: The Add Route page in the cnMaestro UI
2. Type the seed prefix value in the Destination text box.
3. Type the required PoP’s interface IP address in the Gateway text box.
4. Click Add.
The IPv6 route is added.
When the feature is enabled, all the above steps (described from step 1 to step 5 in this section)
are not required and IPV6 routes are added automatically.
5. Select the Auto Manage Routes check box in the IPv6 Routes page.
Figure 250 shows the location of the Auto Manage Routes check box in the IPv6 Routes page.
Figure 250: The Auto Manage Routes check box