Cambium Networks cnWave, Руководство пользователя

Страница: 215 / 248

Operation 215
Figure 234:
An example of the receive level when aligning - Link planner
5. Make use of the direction of arrival information (if there is any elevation or azimuth mismatch) to
physically align the radio antennas.
l
When there is an elevation mismatch (as shown in Figure 235 ):
Figure 235: Example of the elevation mismatch
In Figure 235 , the angles are exaggerated to show the point. In this example, consider that
the radio has been misaligned by a down-tilt of 2 degrees behind the unit (from an
installer’s view side). This means that the angle of the beam selected might be in the +2
degrees direction in the elevation due to beamforming. The aim is to get the optimal
boresight beam. Therefore, the radio must be up tilted in the elevation direction by 2
degrees. The selected beam is now closer to the boresight beam, as shown in
Figure 236 .