38
/ 55
Voltage setpoint
The user can introduce an independent voltage setpoint per every channel.
Current setpoint
The user can introduce an independent current setpoint per every channel.
Active power setpoint
The user can introduce an independent power setpoint per every channel.
SET REACTIVE
The
SET REACTIVE
button allows the user to introduce a global reactive power setpoint. The
procedure to follow is the same as with the
COMMANDS
button. Regardless of the current
mode, the user is allowed to enter the desired reactive setpoint.
5.2.3.
Configuration
The Configuration window provides the user with some helpful information about the
following variables:
Connection mode
Mode
Control
By means of the upper buttons shown, the user may manage these variables in case the
current Control variable is set to LCD.
Connection mode
The following screen appears when the user presses the
Connection mode
button:
