manualshive.com logo in svg

Calrec SUMMA, Руководство пользователя

Поделиться
Скачать
Calrec SUMMA Скачать руководство пользователя страница 79

Editing Labels

To edit a user label:

1.  Select one or more faders and tap 

USER LABEL 

.  The footer changes to display a text entry field and four 

buttons, 

PREVIOUS

, 

NEXT 

, 

DONE

, 

CANCEL 

.

2.  Enter fader labels using either the software keyboard or an external keyboard connected via one of the three 

surface USB ports.

3.  Scroll through the fader label fields by tapping them, or by tapping 

PREVIOUS 

and 

NEXT 

.

4.  Once you are happy with your changes, tap 

DONE 

.

Port Labels 

User Label:

A label given to a port/path/bus from the Summa interface.  This is only viewable on the console that it was made on.

Port User Label:

A label given to a port by the network administrator via H2O.  This label is viewable across the Hydra2 network.

System Label:

A port label generated within an I/O box and viewable across the Hydra2 network.

Cloning Paths

To clone a path:

1.  Select one or more faders, at least one of which must have a path attached.
2.  Tap 

CLONE 

in the control window footer.

3.  Tap the fader(s) to which you wish to clone the selected path(s).
4.  Tap 

CLONE 

again to confirm your choice.

As you tap possible destinations, previews of the potential placements appear to help with your decision.  A colour 
indication system is used to indicate the possible outcome of your choice: green when the destination is empty, orange 
when a path other than a channel is assigned to the fader, and red when a channel path is assigned to the fader.          
Red is used to indicate channel paths because if a channel is removed from a fader it no longer exists.

Once you have selected your destination you are presented with two options, 

CANCEL 

or 

CLONE & OVERWRITE 

which replaces the destination path with a clone of your original selection and removes the original path(s) from the 
surface.  As channels don’t exist once they are removed from faders, a pop-up appears if you attempt to overwrite a 
channel, requiring you to confirm your choice.

Moving Paths  to  Different Faders

1.  Select one or more faders, at least one of which must contain a path.
2.  Tap 

MOVE 

in the control window footer and tap the fader that you wish to move the selected paths to.

3.  Tap 

MOVE 

again to confirm your choice.

CALREC 

Putting Sound in the Picture

 

79

Содержание SUMMA







































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды