manualshive.com logo in svg

Calrec SUMMA, Руководство пользователя

Поделиться
Скачать
Calrec SUMMA Скачать руководство пользователя страница 190

 E 

 

Ember

The Ember protocol is a sophisticated data exchange mechanism that has potential for remote control of many functions 
across varied equipment types.

 

 F 

Fader

Faders are located on surface fader panels.  Channels, Mains, Groups, Auxs and Tracks can all be attached to faders 
allowing for control over level and access.  Faders are also used to control VCA groups.

Foldback

An audio mix sent to a presenter or artist.  Applications include enabling them to hear their own input or communications.

 G 

Gigabit Ethernet

A family of network technologies used for connecting equipment and efficiently passing large amounts information over 
copper or fibre links.

GPIO

These connections allow simple on/off signals to be sent and received by the system.  Functions of the system can be 
controlled from external sources via opto-isolated inputs.  The system can control external items of equipment based upon 
surface actions via relay outputs.  GPI/O connections are optional fittings for Hydra2 I/O boxes

Group

A bus to which many audio signals can be routed, summed and controlled simultaneously with a single fader.  Groups 
have full EQ and dynamics processing.  For example, all audience microphones may be sent to the same group bus for 
easy access.  Groups must be routed to output buses in order to be patched out of the system.

 H 

Hydra2

An audio networking system which links I/O boxes to one or many consoles over Gigabit Ethernet.  Summa is based 
around a Hydra 2 system.

Hydra2 Router Module

All Hydra2 I/O boxes connect to the network via a router.  The router module contains 16 SFP sockets that can accept 
either copper or a range of fibre connections by using the appropriate adaptor.

 I 

IFB Interruptable Fold Back

IFB is a foldback mix which can be interrupted by tone or talkback.  This function is normally handled by the track buses.

190   SUMMA 

Networked Audio Production System

TERMINOLOGY

Содержание SUMMA







































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды