BW Technologies CONNEX1, Руководство оператора

Страница: 29 / 72

ConneX1 Operator’s Manual
19
(,)-$
NOTE
BW Technologies by Honeywell recommends to bump test the
#
gas by exposing the detector a gas concentration that exceeds
the alarm setpoints. Verify that the audible and visual alarms
&
limits.
4.3 (,)-$
NOTE
" ! %
settings.
Use DHCP: When enabled, a dynamic IP address is assigned to the detector.
Use a Static IP Address: When enabled, a static IP address is assigned to the
detector.
s Static IP Address: Assign a static IP address to the detector
s Gateway: Enter the Gateway address
s Subnet Mask: Enter the Subnet Mask
Scan Channel List: Lists the channels the detector will scan for a signal. Click
Edit to add more channels to the list. Default is all channels.
Security Mode: Select the type of security. Choose from WEP , WPA-Personal ,
WPA2-Personal , and WPA2-Mixed . Select disabled for no security.
Security Key: Enter the password to access the network.
SSID: Enter the name of the network.
LocaXion Manager IP Address: Enter the IP address of the computer running
LocaXion Manager.
LocaXion Manager UDP Port: Leave as default 50009 .
5. Mandown Alarm
The Mandown feature allows sueprvisors to take action if no motion is detected.
If no motion is detected for a user-defined period, the Mandown notification screen
displays for 10 seconds. If the alarm is not cancelled by pressing , the Panic
Alarm activates and a Help message is sent to LocaXion Manager.
Mandown Alarm is temporarily disabled while the detector is in IntelliDoX,
communicating with Fleet Manager via IR Link, and charging.
For more information on Panic Alarm, refer to 7.4 Panic Mode on page 22