BW Technologies CONNEX1, Руководство оператора

Страница: 20 / 72

ConneX1 Operator’s Manual
10
Activating/Deactivating the Detector
14. If the last bump test failed, press to accept. If the failure is not
acknowledged, the detector powers off.
If the last bump test was successful, proceed to step # 16 .
15. If the bump test is overdue, press to accept. If bump test is not overdue,
proceed to step #
16 .
(Note: “ To start” alternates with “ To continue” every 4 seconds.)
If Force Bump Test is enabled, a bump test must be completed before
entering normal operation. If a bump test is not performed, the detector
automatically powers off.
16. The screen displays the number of days until the next bump test.
17. The detector displays a startup summary.