BW Technologies CONNEX1, Руководство оператора

Страница: 28 / 72

ConneX1 Operator’s Manual
18
+'
NOTE
Regulations may vary depending upon region. Adhere to the
&
Enter the period ( 4 - 16 hours) in the <=;' field. The detector is
shipped with a default setting of 8 hours.
4.2.2.3 Calibration and Bump Setup
NOTE
The calibration and bump test settings are the same between
Bump Interval: Define how often the sensor should be calibrated.
1. Enter the value ( 0 - 365 days) for the sensor.
2. Enter 0 to disable the bump interval option. The detector is shipped with
the factory default setting of 0 days.
$$<! Define the maximum response time for the
detector to react to bump test gas.
$ < > : Define the minimum bump test gas concentration that
must be registered by the detector to pass the bump test.
?$$!
WARNING
%&"'&
the gas concentration value on the gas cylinder.
Enter the gas concentration value in the #$$ field.
&! Define how often the sensor should be calibrated.
1. Enter the value ( 0 - 365 days) for the sensor.
2. Enter 0 to disable the calibration interval option. Entering 0 automatically
deactivates the Force Calibration option. The detector is shipped with
the factory default setting of 180 days.
CAUTION
BW Technologies by Honeywell recommends that the sensor be
calibrated at least once every 180 days (6 months).
&! A reminder for the next calibration will display a number of
days before the calibration is due. The reminder can appear anywhere from 0 - 365
days before the calibration due date.
Enter 0 automatically deactivates the Cal Reminder option. The detector is shipped
with a default setting of 10 days.
$ &! Define how often a bump test should be performed for
each sensor in the $ & field. A different bump interval can be
defined for each sensor.
1. Enter the value ( 1 - 365 days) for each sensor.
2. Enter 0 to disable the bump interval option. Enter 0 automatically
deactivates the Force bump option.
The detector is shipped with the factory default setting of 0 days.