BW Technologies CONNEX1, Руководство оператора

Страница: 43 / 72

ConneX1 Operator’s Manual
33
Upgrading the Firmware
15.2 Upgrading the Firmware
The detector firmware can be upgraded using the IR Link or IntelliDoX.
For more information, refer to the Fleet Manager II Operator’s Manual or IntelliDoX
Technical Reference Manual.
15.3 ? #
A calibration certificate can be generated from any calibration done manually or
with the IntelliDoX. A certificate is generated using Fleet Manager II.
WARNING
%
required, contact BW Technologies by Honeywell .
16. Maintenance
To maintain the detector in good operating condition, perform the following basic
maintenance as required.
s Calibrate, bump test, and inspect the detector at regular intervals
s Maintain an operations log of all maintenance, bump tests, calibrations,
and alarm event
s
Clean the exterior with a soft damp cloth. Do not use solvents, soaps,
or polishes. Refer to
1.3 Sensor Poisons and Contaminants on page 5 .
16.1 Charging the Rechargeable Battery
WARNING
To avoid personal injury and/or property damage, adhere to the
following:
Charge the battery immediately when the detector emits a low battery alarm.
Charge the battery in a safe area that is free of hazardous gas in temperatures
&&*+2+23+"32+"
Charge the battery using BW Technologies by Honeywell charger adapters
&43 7& "
9;
%&&&& <&&
adapter outside your region will damage the charger and the detector.
%43=
$ 7!3+>3>+"!
incinerate.
?;3@+>FF+"3
9;
e
D
ispose of used lithium cells immediately. Do not disassemble and do
7; G
J$
Keep lithium cells away from children.
CAUTION
When charging, the detector will not detect gas.
M&&!?4'&